A Square Car Detailing
A Square Car Detailing
Starting from the pattern / procedure of using the Air gun, Water gun, Vacuuming, Spraying perfume, Polishing pad(s) usage pattern, Chemical Application methodology, Dedicated Curing time for each step etc., we take utmost care in these areas which yields best results.
Most important, we use only one individual to perform Paint correction, Surface preparation, Application and Final touch to maintain consistency. Of course, inspection is done by another person to have the second eye touch. This gives us the pride in spelling perfection when it comes to car detailing
All the products used have been carefully chosen with customization in mind.
We use only soft water for washing
PPF / Graphene / Ceramic / Wax Coatings – We adopt an absolute <1% error threshold clear coat gauge to assess the clear coat (Urethane/Acrylic surface paints etc.) . This is vehicle / condition specific (120-150 Microns for KIA cars, ~110 Micros for Japanese cars, >=190mm for Czech/German Cars,~100 residual microns for Tata Cars…). This would make us achieve the bottom-line factors viz. glossy effect, highly durable protective layer, self healing, extreme slickness and hydrophobic characteristic and most importantly – Consistency and Endurance. We also use top notch brands for PPF like XPEL, Saint Gobain etc.
In assessing the spots / scratches for paint correction / surface preparation, we use lights that are atleast 6500 Kelvin which includes Sharp focus, Flat focus and Spread focus LEDs which reveal even the micro issues at a molecular level.We use high quality IPA’s that are dedicated for detailing and not generic industrial IPA’s
Steps to be followed and the sequence is critical to achieve the best outcome. ACD sincerely follows these steps. Exceptions is also given utmost care and SOP might be tweaked at times to fit the requirement to achieve best results. For Example, water spots might have to be removed on the glasses wherein the ACD team uses a water spot remover instead of a glass cleaner. Both cannot be used together to avoid chemical reaction
ACD strongly believes in arresting the root cause of the problem before treating the cabin. This would always lead to a permanent solution. For example, diesel spillage inside the cabin first requires proper cleaning of the affected area and completely removing the residues before treating the cabin. Next step would be to clean the interiors completely to avoid residual smell absorbed by the materials like seats, upholstery etc. Then, steamer is used to kill germs, bacteria etc. Finally, Ozonator is used to neutralize the air ambience to erase any trail. This creates a difference
Concept of detailing is materialized in action. Surface preparation is a critical factor and is meticulously followed in ACD
Customer is our King. We interact with the customer to ascertain the need of the customer first. With our expertise, we guide them with the best solution. One would be able to define passion by interacting with the ACD team
Fra-Ber, Mafra, Menzerna, Osren, Supa Gard, MaxShine, Cquartz, Hyper, Xpel 5, Saint Gobain etc.
Schumak 5 HP pressure washer is used wherein water infused for pressure wash is inlet filtered with high grade imported filters
Maxshine hot air blaster is used for drying the interiors
Six nozzle under body stance is a trend setter and was exclusively designed for underbody washing of sensitive current generation vehicles equipped with ADAS, AEB, Pedestrian Protection etc. including the German Trios
Window glasses are cleaned including the edges as a standard that really makes a difference
Perfume used for post washing / detailing is of niche quality for the customer to feel the difference
Industry first floor mats are being used by ACD which are laminated sheets and prove their utility aspect
Protocol followed is industry first. When a vehicle is dropped for any of the services, step by step videos / photos are shared with corresponding narration with an intent of knowledge sharing and status update to the customers